CNC Machining Center
5-Axis Machined Anodized 6061 Aluminum Servo Motor Housing 0.01mm Bore Fit
0.01mm precision 5 axis CNC machined 6061 aluminum servo motor housing, CMM verified bores, one-setup process and stable batch delivery.
Large Plate Heat Sink Cooling Fins Thin Wall Aluminum Machining 0.01mm Repeatability
Precision 5-axis CNC machined large aluminum plate heat sinks with ±0.01mm tolerance and controlled flatness for optimal thermal contact. Features thin-wall fins, multi-cavity layouts, and dense hole patterns in 6061/7075/5083 aluminum. Full QC inspection, anodizing options, and scalable prototype-to-mass production from a direct factory.
5-Axis CNC Machined Robot Arm Joint Linkage 6061-T6 Aluminum 0.01mm Precision Fit
Five-axis single-clamping robot arm joint linkage in 6061-T6 aluminum, ±0.01mm on bearing bores, CMM inspected and shipped on a committed date.
Swiss Type CNC Turned Pin 316L Stainless 0.005mm Small Diameter Custom
Swiss type CNC turning of small diameter pins from 0.8 mm in 316L stainless and other alloys, 0.005 mm on diameter, with cross holes and threads completed in the same cycle.
Aluminum Guide Tube Support Bracket Bored Boss Clamp Slit CNC Precision Machined 0.01mm
6061-T6 aluminum guide tube support bracket, 5-axis machined with a bored H7 boss, clamp slit and counterbored mounting flange. Bore perpendicularity 0.01mm, bore position +/-0.02mm, checked free and with the clamp screw tightened. Custom bore, boss layout and mounting per drawing, MOQ 1 piece, ISO 9001:2015.
5-Axis Machined Multi-Face Tombstone Fixture Tower with 0.01mm Locating Hole Grid Precision
6061-T6 aluminum tombstone fixture tower with 1-4 faces, H7 bored hole grids held to ±0.01mm pitch and ±0.02mm position from a single base datum. Base flatness 0.01mm, perpendicularity 0.02mm. 5-axis 3+2 machined, CMM inspected with first-article report. Custom face layouts, interfaces, and finishes available. Prototypes 3-7 days.
316L Stainless Steel Hydraulic Manifold Block with Cross-Drilled Passages Rated to 400 Bar
Machined from solid 316L stainless bar, this manifold block features gun-drilled cross passages, 400 bar rating, and ±0.01mm precision. Custom port layouts, cavity profiles, and thread standards per schematic. ISO 9001 certified, 100% pressure tested with certificate. Prototypes from 1 piece, 3-7 days.
Titanium TC4 Impeller Hub Integral Shroud Ring 5-Axis Machined 0.005mm Blade Profile Casing
TC4 titanium impeller hub with integral shroud ring, 12 twisted blades 5-axis machined in one setup. Blade profile 0.005-0.01mm, bore H6 cylindricity 0.005mm, tip clearance 0.03mm, balanced to G2.5. Non-standard blade counts, bores and interfaces per drawing, MOQ 1 piece, ISO 9001:2015.
Rectangular Deep Cavity Electronic Housing Stepped Pocket Mirror Bored CNC Precision Machined 0.01mm
Rectangular deep cavity electronic housing machined from solid 6061-T6 aluminum in one 4-axis/5-axis setup. Two-level stepped pocket, gasket sealing groove, M12 connector ports, +/-0.01mm tolerance, mirror cavity Ra 0.05um. Non-standard geometry and finishing per drawing, MOQ 1 piece, ISO 9001:2015, stable repeat delivery.
