Dongguan Changxinda Precision Technology Co., Ltd.
8618076650306
lu@cxdcnc.com
Kualitas Thin-Wall Part Holding Fixture with Contoured Pockets for 0.01mm Repeatability and Thin-Wall Support in Aerospace Components pabrik
<
Kualitas Thin-Wall Part Holding Fixture with Contoured Pockets for 0.01mm Repeatability and Thin-Wall Support in Aerospace Components pabrik
Kualitas Thin-Wall Part Holding Fixture with Contoured Pockets for 0.01mm Repeatability and Thin-Wall Support in Aerospace Components pabrik
Kualitas Thin-Wall Part Holding Fixture with Contoured Pockets for 0.01mm Repeatability and Thin-Wall Support in Aerospace Components pabrik
Kualitas Thin-Wall Part Holding Fixture with Contoured Pockets for 0.01mm Repeatability and Thin-Wall Support in Aerospace Components pabrik
Kualitas Thin-Wall Part Holding Fixture with Contoured Pockets for 0.01mm Repeatability and Thin-Wall Support in Aerospace Components pabrik
>

Thin-Wall Part Holding Fixture with Contoured Pockets for 0.01mm Repeatability and Thin-Wall Support in Aerospace Components

Thin-Wall Part Holding Fixture with Contoured Pockets for 0.01mm Repeatability and Thin-Wall Support in Aerospace Components
Tempat Asal:Dongguan, Tiongkok
Nama merek:China-CXD
Sertifikasi:ISO 9001:2015
Nomor Model:CXD-MC-FX04
Jumlah pesanan minimum:1 buah
Harga:USD 48 - 240 / Piece
Standard Packaging:Kantong PE individual dengan pengering, busa EPE, karton ekspor lima lapis, palet kayu lapis untuk a
Waktu Pengiriman:5-8 hari kerja untuk prototipe, 15-25 hari kerja untuk pesanan batch
Ketentuan Pembayaran:T/T,L/C pada pandangan, Western Union
Kemampuan Penyediaan:1.000 Potongan Per Bulan
Tag:

cnc machining center

5-axis cnc machining

aluminum cnc machining
Rincian produk
Menyoroti:

Thin-Wall Holding Fixture

,

Contoured Pocket Machining

,

0.01mm Clamp Repeatability
Process: Pemesinan kontur kantong 3D dari model yang dipindai
Material: aluminium 6061-T6 / 7075-T6
Profile Accuracy: 0,02 mm terhadap model bagian
Pocket Depth: +/-0,01 mm
Clamp Repeatability: 0,01 mm setelah beban berulang
Clamp Pad Coplanarity: 0,02 mm
Base Flatness: 0,01 mm
Relief And Clearance: 0,3 hingga 0,5 mm pada permukaan non-kontak
Surface Roughness: Permukaan kontak Ra 0,8 um
Surface Finish: Anodisasi keras, area kontak ditutupi atau dilapisi
Confidentiality: NDA, penyimpanan program berkode, tidak ada foto publik
Inspection: Perbandingan pemindaian CMM atau 3D, laporan artikel pertama
Deskripsi Produk
Detailed Specifications & Features
Support, do not crush. Contoured pockets machined to 0.02 mm of the part model, 0.01 mm clamp repeatability, and 0.3–0.5 mm relief on all non-contact surfaces. Thin-wall aerospace parts fail in two places: in the machine, when the fixture squeezes them out of round, and after the machine, when the clamps come off and the part springs back. This fixture is designed to avoid both. The pocket is machined from the part model with a 0.3 to 0.5 mm relief on every surface that does
Message for quick reply
Produk terkait
Kualitas Rumah Motor Servo Aluminium 6061 Anodized Mesin 5-Axis Kecocokan Lubang 0,01mm pabrik

Rumah Motor Servo Aluminium 6061 Anodized Mesin 5-Axis Kecocokan Lubang 0,01mm

Perumahan motor servo aluminium 6061 mesin CNC 5 sumbu presisi 0,01mm, lubang terverifikasi CMM, proses satu pengaturan, dan pengiriman batch yang stabil.

Kualitas Sirip Pendingin Pelat Besar Sirip Pendingin Dinding Tipis Aluminium Pemesinan Pengulangan 0,01mm pabrik

Sirip Pendingin Pelat Besar Sirip Pendingin Dinding Tipis Aluminium Pemesinan Pengulangan 0,01mm

Heat sink pelat aluminium besar bermesin CNC 5 sumbu presisi dengan toleransi ±0,01mm dan kerataan terkontrol untuk kontak termal optimal. Dilengkapi sirip berdinding tipis, tata letak multi-rongga, dan pola lubang padat dari aluminium 6061/7075/5083. Inspeksi QC penuh, opsi anodisasi, dan produksi prototipe hingga massal yang dapat diskalakan dari pabrik langsung.

Kualitas Sambungan Lengan Robot CNC 5-Axis Machined 6061-T6 Aluminium Presisi 0.01mm pabrik

Sambungan Lengan Robot CNC 5-Axis Machined 6061-T6 Aluminium Presisi 0.01mm

Sambungan sambungan lengan robot penjepit tunggal lima sumbu dari aluminium 6061-T6, ±0,01 mm pada lubang bantalan, CMM diperiksa dan dikirim pada tanggal yang ditentukan.

Kualitas 5-Axis Machined 6061 Aluminum Laser Head Manifold with 0.008mm Seal Face for Automated Welding Cells pabrik

5-Axis Machined 6061 Aluminum Laser Head Manifold with 0.008mm Seal Face for Automated Welding Cells

Manifold 6061-T6 bermesin 5 sumbu dengan empat sirkuit terisolasi, masing-masing kebocoran diuji secara terpisah. Kerataan permukaan segel 0,008mm, Ra 0,4um, posisi port ±0,01mm. Dilindungi NDA, minimum satu bagian, tanpa biaya perkakas. bersertifikat ISO 9001:2015.