Dongguan Changxinda Precision Technology Co., Ltd.
8618076650306
lu@cxdcnc.com
Kualitas 6061 Aluminum Circular Cavity Housing with Sealing Steps and 0.01mm Bore Coaxiality for CNC Turned Device Enclosures pabrik
<
Kualitas 6061 Aluminum Circular Cavity Housing with Sealing Steps and 0.01mm Bore Coaxiality for CNC Turned Device Enclosures pabrik
Kualitas 6061 Aluminum Circular Cavity Housing with Sealing Steps and 0.01mm Bore Coaxiality for CNC Turned Device Enclosures pabrik
Kualitas 6061 Aluminum Circular Cavity Housing with Sealing Steps and 0.01mm Bore Coaxiality for CNC Turned Device Enclosures pabrik
Kualitas 6061 Aluminum Circular Cavity Housing with Sealing Steps and 0.01mm Bore Coaxiality for CNC Turned Device Enclosures pabrik
Kualitas 6061 Aluminum Circular Cavity Housing with Sealing Steps and 0.01mm Bore Coaxiality for CNC Turned Device Enclosures pabrik
>

6061 Aluminum Circular Cavity Housing with Sealing Steps and 0.01mm Bore Coaxiality for CNC Turned Device Enclosures

6061 Aluminum Circular Cavity Housing with Sealing Steps and 0.01mm Bore Coaxiality for CNC Turned Device Enclosures
Tempat Asal:Dongguan, Guangdong, Cina
Nama merek:China-CXD
Sertifikasi:ISO 9001:2015
Nomor Model:Kebiasaan
Jumlah pesanan minimum:1 buah
Harga:According to the drawing, quoted within 24 hours
Standard Packaging:Lubang ditutup, bagian dikantongi dengan film pelindung, karton ekspor berlapis busa, kemasan pelang
Waktu Pengiriman:Prototipe 3-7 hari kerja setelah persetujuan gambar termasuk anodisasi; 10-12 hari dengan paket uji
Ketentuan Pembayaran:T/T,L/C,D/P,D/A,Western Union
Kemampuan Penyediaan:10.000 Potongan per Bulan
Tag:

cnc machining center

5-axis cnc machining

aluminum cnc machining
Rincian produk
Menyoroti:

Sealing Step Housing Boring

,

Circular Cavity Coaxial 0.01mm

,

Cover Face Turning
Material: standar 6061-T6; 7075-T6, tahan karat 304/316L, tersedia kuningan
Machining Method: Putar penggilingan, bor tangga, dan tutupi permukaan dalam satu pengaturan
Bore Diameter: +/-0,01 mm
Bore To Step Coaxiality: 0,01 mm
Step Diameter: +/- 0,02 mm
Step Height: +/- 0,02 mm
Bore Roundness: 0,01 mm
Cover Face Flatness: 0,02 mm
Cover Face Squareness: 0,02 mm
Screw Hole Position: +/- 0,03mm
Seal Land Roughness: Ra 0,8 mm
Anodize: Tipe II hanya eksternal 10-15 um, lubang dan ulirnya tertutup
Sealing Steps: 2-5 langkah, disesuaikan dengan ukuran O-ring atau gasket Anda
Size Range: Bor 8-250 mm, panjang 15-300 mm, dinding dari 1,5 mm
Air Tightness: Tidak ada kebocoran pada 0,2 MPa berdasarkan permintaan dengan catatan
Confidentiality: NDA bersama ditandatangani sebelum transfer file
Quality Standard: ISO 9001:2015, GB/T 1804-2000
Deskripsi Produk
Detailed Specifications & Features
This circular cavity device housing is machined with the bore, all sealing steps and the cover face turned in a single set-up, so every seal seats on one common axis. Built for electronics enclosures that must stay sealed against dust, coolant mist and moisture, it is available from a single prototype piece with no tooling charge. Bore coaxiality0.01 mm, bore, all steps and cover face referenced to one axis Step height±0.02 mm, each sealing step measured individually Order
Message for quick reply
Produk terkait
Kualitas Rumah Motor Servo Aluminium 6061 Anodized Mesin 5-Axis Kecocokan Lubang 0,01mm pabrik

Rumah Motor Servo Aluminium 6061 Anodized Mesin 5-Axis Kecocokan Lubang 0,01mm

Perumahan motor servo aluminium 6061 mesin CNC 5 sumbu presisi 0,01mm, lubang terverifikasi CMM, proses satu pengaturan, dan pengiriman batch yang stabil.

Kualitas Sirip Pendingin Pelat Besar Sirip Pendingin Dinding Tipis Aluminium Pemesinan Pengulangan 0,01mm pabrik

Sirip Pendingin Pelat Besar Sirip Pendingin Dinding Tipis Aluminium Pemesinan Pengulangan 0,01mm

Heat sink pelat aluminium besar bermesin CNC 5 sumbu presisi dengan toleransi ±0,01mm dan kerataan terkontrol untuk kontak termal optimal. Dilengkapi sirip berdinding tipis, tata letak multi-rongga, dan pola lubang padat dari aluminium 6061/7075/5083. Inspeksi QC penuh, opsi anodisasi, dan produksi prototipe hingga massal yang dapat diskalakan dari pabrik langsung.

Kualitas Sambungan Lengan Robot CNC 5-Axis Machined 6061-T6 Aluminium Presisi 0.01mm pabrik

Sambungan Lengan Robot CNC 5-Axis Machined 6061-T6 Aluminium Presisi 0.01mm

Sambungan sambungan lengan robot penjepit tunggal lima sumbu dari aluminium 6061-T6, ±0,01 mm pada lubang bantalan, CMM diperiksa dan dikirim pada tanggal yang ditentukan.

Kualitas 5-Axis Machined 6061 Aluminum Laser Head Manifold with 0.008mm Seal Face for Automated Welding Cells pabrik

5-Axis Machined 6061 Aluminum Laser Head Manifold with 0.008mm Seal Face for Automated Welding Cells

Manifold 6061-T6 bermesin 5 sumbu dengan empat sirkuit terisolasi, masing-masing kebocoran diuji secara terpisah. Kerataan permukaan segel 0,008mm, Ra 0,4um, posisi port ±0,01mm. Dilindungi NDA, minimum satu bagian, tanpa biaya perkakas. bersertifikat ISO 9001:2015.